14.04.2022, 02:28
Commonly referred to as “wet location” fixtures, LED Vapor Tight Fixtures are sealed and gasketed luminaires that provide general illumination for indoor and outdoor environments where exposure to water, humidity, and dust is likely to occur. These luminaires are usually mounted on ceilings, soffits, walls, or in any other commercial and industrial building or facility where exposure to water or dust (or other elements) is a concern.
As we have discussed in previous posts, the way LEDs operate provides inherent advantages over fixtures that utilize fluorescent lamps. LED wet location fixtures are adaptable to a wide range of wet, humid, and dusty lighting applications. This adaptability is a key benefit of enclosed and gasketed LED fixtures.
Often the biggest question when it comes to vapor tight led Weatherproof Light is whether to utilize an LED tube within an existing fixture, or to install a new LED vapor tight fixture. Ultimately, that decision is driven by the customer and their expectations and constraints as they pertain to budget and desired performance. But both are possibilities.
Below we present the three most common benefits of LED vapor tight lighting, including energy savings, maintenance cost reduction, and improved lighting performance.
Energy Savings
The wattage of a 4 foot LED vapor tight light fixture typically ranges from 12 watts to 55 watts, resulting in a 40%-60% percent reduction in energy consumption over fluorescent vapor tight lighting. The LED fixture wattage range is so dramatic due to the need to adapt to the many different applications of vapor tight lighting Non Corrosive Fitting. Since it is common for fluorescent wet location fixtures to utilize between one and four lamps per fixture, by using LED vapor tight lights in these applications, it is possible to save over $5,000 per year for a building or facility with 100 fluorescent vapor tight fixtures.
Maintenance Cost Reduction
The way LEDs generate light and progress through their functional life results in a much longer operating life compared to conventional fluorescent light fixtures. Another advantage realized from LED Tri Proof Light is that they are not negatively affected by cycling (turning on and off), so they are more reliable in scenarios where lighting may be turned on and off frequently. Additionally, light emitting diodes function extremely well in cold environments and would not be subject to the negative effects on product lifetime experienced by fluorescent lamps in similar applications.
Lighting Performance
As a result of the multi-point design, LED Batten Lights often provide a very evenly distributed light pattern. The result, in regards to LED vs fluorescent, is a more even foot candle distribution from the LED conversion. In addition to the even distribution of light, LEDs are available in a range of color temperatures (correlated color temperatures) and as a result provide a range of options to increase the visual perception of “brightness." This aspect is crucial in manufacturer or food processing facilities where employees need high performance task lighting, and for outdoor retail applications where tenants and companies want to ensure that their products and branding are clearly visible.
Light-emitting diode (LED) technology offers bright illumination while using a fraction of the electricity used by incandescent bulbs. You’ve likely been replacing the old bulbs in your light fixtures with LED bulbs over the past few years. That’s still a good idea, but you can also purchase LED ceiling light fixtures that emit light without the need for standard-size LED bulbs.
The best LED Ceiling Light for your home depends on the fixture type and what brightness is most suitable for a particular room; for instance, kitchens and bathrooms typically require more intense lighting than family rooms and bedrooms.
What to Consider When Choosing the Best LED Ceiling Light
LED lights offer bright illumination while conserving energy—plus, they last approximately 50 times longer than incandescent bulbs. But before you dig out your credit card, you might want to consider the following factors to get the best one for your needs.
As we have discussed in previous posts, the way LEDs operate provides inherent advantages over fixtures that utilize fluorescent lamps. LED wet location fixtures are adaptable to a wide range of wet, humid, and dusty lighting applications. This adaptability is a key benefit of enclosed and gasketed LED fixtures.
Often the biggest question when it comes to vapor tight led Weatherproof Light is whether to utilize an LED tube within an existing fixture, or to install a new LED vapor tight fixture. Ultimately, that decision is driven by the customer and their expectations and constraints as they pertain to budget and desired performance. But both are possibilities.
Below we present the three most common benefits of LED vapor tight lighting, including energy savings, maintenance cost reduction, and improved lighting performance.
Energy Savings
The wattage of a 4 foot LED vapor tight light fixture typically ranges from 12 watts to 55 watts, resulting in a 40%-60% percent reduction in energy consumption over fluorescent vapor tight lighting. The LED fixture wattage range is so dramatic due to the need to adapt to the many different applications of vapor tight lighting Non Corrosive Fitting. Since it is common for fluorescent wet location fixtures to utilize between one and four lamps per fixture, by using LED vapor tight lights in these applications, it is possible to save over $5,000 per year for a building or facility with 100 fluorescent vapor tight fixtures.
Maintenance Cost Reduction
The way LEDs generate light and progress through their functional life results in a much longer operating life compared to conventional fluorescent light fixtures. Another advantage realized from LED Tri Proof Light is that they are not negatively affected by cycling (turning on and off), so they are more reliable in scenarios where lighting may be turned on and off frequently. Additionally, light emitting diodes function extremely well in cold environments and would not be subject to the negative effects on product lifetime experienced by fluorescent lamps in similar applications.
Lighting Performance
As a result of the multi-point design, LED Batten Lights often provide a very evenly distributed light pattern. The result, in regards to LED vs fluorescent, is a more even foot candle distribution from the LED conversion. In addition to the even distribution of light, LEDs are available in a range of color temperatures (correlated color temperatures) and as a result provide a range of options to increase the visual perception of “brightness." This aspect is crucial in manufacturer or food processing facilities where employees need high performance task lighting, and for outdoor retail applications where tenants and companies want to ensure that their products and branding are clearly visible.
Light-emitting diode (LED) technology offers bright illumination while using a fraction of the electricity used by incandescent bulbs. You’ve likely been replacing the old bulbs in your light fixtures with LED bulbs over the past few years. That’s still a good idea, but you can also purchase LED ceiling light fixtures that emit light without the need for standard-size LED bulbs.
The best LED Ceiling Light for your home depends on the fixture type and what brightness is most suitable for a particular room; for instance, kitchens and bathrooms typically require more intense lighting than family rooms and bedrooms.
What to Consider When Choosing the Best LED Ceiling Light
LED lights offer bright illumination while conserving energy—plus, they last approximately 50 times longer than incandescent bulbs. But before you dig out your credit card, you might want to consider the following factors to get the best one for your needs.